Search This Message Board:
MF 40 Transmission
[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ Massey Ferguson Tractor Discussion Forum ] [ FAQ ]
Post a Followup
||I have a MF40 and it has the high/low and 1/2 transmission. I was wandering if it has tranny filters and where they are at. If you step on the pedal for forward or reverse it acts like it is in neutral and then sometimes it will move. It does it in both for and rev. Any info would be greatly appreciated.
||Check the linkage and make sure the switch is traveling all the way forward and reverse.
There are two needle valves on the left side. Unscrew these and remove the spring, rod and pressure caps. Clean these and replace.