Search This Message Board:
MF240 will not pull
[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ Massey Ferguson Tractor Discussion Forum ] [ FAQ ]
Post a Followup
||I have a mf240 that will not pull,the pto works but when you put it in gear it will not move.With the tractor running you can switch gears with out engageing the cluch but nothing happens.Anyone that can tell me what they think the problem might be would be appreciated.
I am sure it is one of two thing either the transmission main disc is slipping or has the hub broke out or the shear coupler in the rear center housing has sheared or the cotter pin that holds it in place has come out. To check to see if it is the clutch put both shift levers in gear remove the transmission fill plug look inside to see if the gears are turning when you let the clutch out. If the gears turn it probably is the shear coupler. If the gears do not turn then it would be your clutch. If I can be of further help email me at firstname.lastname@example.org