Search This Message Board:
massey ferguson to35
[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ Massey Ferguson Tractor Discussion Forum ] [ FAQ ]
Post a Followup
|| 1966 model stuck in reverse my son was driving when he came to a stop put it in to netural then went to go to second gear it was hung in reverese. Does any one know how to get this un stuck without taking it apart.I really need some help.Thanks for any suggestings.
||This is from my Massey Ferguson web site I thing it will help you with that problem. If I can be of further help Email at email@example.com
Getting the main shift lever unstuck
Pull your filler plug for the transmission look inside you will see a big gear. Find a level spot shut off the tractor. Push the clutch down & put the high low shifter in neutral to relieve any pressure that might be on the gears. With a long screwdriver or a small pry bar pry the big gear forward if it is hung in reverse. Pry it back if it is hung in first gear. If you happen to go to far it will go in the other gear. You need to get it in the center. You should be able to feel the detent balls pop in the grooves in the shift rail as you move the gear. Through the years I have probably unstuck at least a 1000 of them this way. It is a common problem on the Massey tractors after they get a little wear on them