Search This Message Board:
Rear hydraulic arms aren't working right
Post a Followup
| Steve Blackwelder
||I have a 2002 451 Massey and when you start it the lift arms will go all the way up but that's all they will do. There is no way to control them. It has a Massey 1040 loader and it works fine. I drained the Trans/Hyd oil and cleaned the screen but that didn't work, so I wonder if anyone else out there has experienced this problem?
| Jimmy Houser
||I had this happen a few times. Inside the rh cover where the transmission dipstick is, you can see a lever sticking down from the lift cover and another lever with a roller sticking up from the hydraulic pump. Make sure the top lever is behind the bottom roller. If not, pop the roller out and reposition it. If this is not the case, you will have to re adjust the lift arm settings by removing the lift cover.