|Allis Chalmers||Avery||Bobcat||Case David Brown||Caterpillar||Cockshutt||Deutz||Euclid||Ford||International Farmall|
|John Deere||Kubota||Massey Ferguson||Minneapolis Moline||Mitsubishi Satoh||New Holland||Oliver||White||Zetor||Miscellaneous (OTHER)|
|| SSB Farm Tractor Parts, Manuals & Antique Tractors||| Aftermarket Farm Tractor Parts||| Service & Repair Farm Tractor Manuals ||
|| Tractor Implements||| Tractor Seats||| Trailer Parts||| Tractor Loaders||| PTO Generators||| Rear View Backup Camera ||
|| Pedal Toy Tractors||| Tractor Books||| Tractor Data / Info / Specs||| Tractor Blog||| Antique Tractors History||| Related Sites||| Rustic Home ||
|How much is your farm tractor worth? Find resale prices for tractors built from 1939 through today, with complete specifications and serial numbers. Save 15% on our Official Tractor Blue Book sale!|
Search This Message Board:
MF 202 ReverseGear
|Randy||I need guidance reassembling the reverse cluster gear on a MF 202 and the internet may be my only hope for help.
I split the tractor and removed the transmission last April. Shortly after that I became seriously ill. Now, months later, memory loss is preventing me reassembling the gear, needle bearings, washers and spacer in the correct order.
My first problem is the amount of needle bearings go in each side. I have 27 pins for both front and rear. However, there appears to be room for a 28th and donít know if thereís any missing or not.
The gear rides on a one inch shaft. I have two brass washers, three flat washers and one spacer about 5/16 thick to center the gear. My second problem is I no longer remember the correct order to install them.
My repair manual doesnít show enough detail.
Thanks for any help.
|Mike||Hey Randy, Im not trying to be a smart ass or anything but for future referance I always take picture's befor I take anything apart that way you always have somthing to refer to they have very good camera's out these day's
Post a Followup