Search This Message Board:
TO-30 PTO shaft
Post a Followup
||I have a 51 TO-30. The hyd. stopped working. Took the top off and found pieces of the cam housing broke and in the bottom of hyd. pump. Tried to pull PTO shaft out to drop pump out the bottom and the cam seems to be stuck to the shaft. Is there a snap ring or something holding the cam to the shaft that I'm not seeing? The shaft slides easy enuf but the cams are stopping it from coming out. Any advise? Can I heat up the cam to get it to slide off?
||I just got done working on my hyd.lift pump.There is not a snap ring on the PTO shaft.It should pull out easily.You must have some debri between the PTO shaft splines and the hydraulic piston drive cam splines.Sounds like maybe a slide type puller might get the job done.The hydraulic piston cam splines are not wanting to let go.