Search This Message Board:
changing alt belt on 40B massy ferguson ind.
Post a Followup
||do I need to separate the front end or will the pump pull out far enough to get new belt around crank. There are 4 bolts on crank pulley do I need to remove these to separate pump. Any help would be appreciated
I have a 50c ind. backhoe, same principle. You have to take the 4 bolts out of the flange, there are rubber bushings with a metal collar in there. Then loosen the 2 bolts holding the pump to the front of the tractor. You don't have to take them all the way out, just enough to pull the pump forward a half to three quarters of an inch. Then pull the shaft forward with the pump, just enough to sneak a belt by.
| donald south
|| you can do like i did get a v belt from mc master-car that comes by the foot and has a link to put it togeather phone no 609 689 3415 i have one on my 20 c don