||I JUST GOT 1958 MF-50 WITH A FRONT LOADER.THE LOADER RUNS OFF THE LIFT PUMP UNDER THE SEAT RIGHT SIDE AND MY PROBLEM IS :THAT WHEN I RAISE THE FRONT LOADER A FIRST IT WORKS GREAT BUT WHEN I SWITCH THE VALVE FOR THE REAR LIFT AND SWITCH IT BACK FOR THE LOADER IT WONT GO UP .I CAN SWITCH IT BACK TO THE REAR AND THE REAR LIFT WORKS.BUT WHEN I TURN THE VALVE BACK TO THE FRONT LOADER AND LEAVE IT SET OVER NIGHT THE FRONT LOADER WORKS .BUT AS SOON AS I SWITCH IT BACK TO THE REAR LIFT IT WONT .COULD IT BE THAT VALVE UNDER THE SEAT? .ANY SUGGESTIONS WOULD BE GREAT
||Is this the type of valve where the Quadrant control has to be in "constant pumping" position to operate the loader ? If so switch the valve before selecting CP. If not i would suspect the diverter valve.
||I'M NOT SURE IF THAT VALVE IS CONSTANT PUMPING.I BELIVE THE VALVE IS CALLED "SELECTOR/ISOLATOR VALVE'I'M NEW AT ALL THIS
| S us an Ramsey
||Been having problem with lift going all way up.lifted it today and it went all way up which it normally doesn't do,and it sounded like it was still trying to go up the white oil came out from around one of the bolts on top