||I have a MF 82 moldboard plow that I bought at an estate sale. One of the plows trips as soon as it enters the ground. Can I adjust the trip pressure or will I have to replace the mechanism. If it can be adjusted, how would I do that? Any help will be greatly appreciated!!!
||if the plow was used in heavy clay soil ,the latch can be fouled with mud ; lift plow with it tripped ,chain back tripped plow (it hurts alot if you dont) and clean out the inside a large flat screwdriver and flaslight make this an easy feild fix if the clay has hardened a pressure washer and partial disassemble may be needed adjusting trip pressure leads to broken points
||I also have the same problem I cannot figure out how to reset the locking mechanism on the tripped plow. It all seems to be there and the others are so rusted it is hard to tell what locks what. need a picture or help
| Clayton Apfelbeck
||I have the same problem as these guys