Search This Message Board:
6200 electrical issues
Post a Followup
||I was working on the lights....got them fixed it was a broken wire. But now the PTO 3pt and tach don't work. The bat light is on when its running but it is charging. When I switch the mfwd on the tach comes up a little and the bat lite dims but its still on. Any help would be appreciated.
|| Sounds like you may have lost the ground on the dash board and instruments. Some have a plastic dash or the instruments may be mounted in plastic, if so look for a ground wire broken, or some may have just a screw going through the panel to a metal part of the body. The ground for the instruments sometimes can be hard to find. You may add a ground wire from the metal body to the ground on the instruments and make it work. Just be sure you are fooling with the ground, and not grounding the hot side.
||John Deere 6200, pto no power under load. How do I fix this problem?