||I recently got a John Deere 300 Industrial tractor with a front end loader.All works great except the bucket under load.Goes up and down fine empty,tilts and dumps fine empty.With a couple hundred pounds not even close to over loaded.The bucket is only able to lift a couple inches and the bucket won't tilt up to roll the bucket back.No crazy sounds at the pump.I did order a service manual but it is a couple weeks away.Any help would be great.
||I have a JD 300. That has a remote hydraulic valve that was leaking through. I disconnected it and the problem went away. I latter put a new valve on it.
||I was browsing and saw that you have a 300 industrial JD. My friend has one with a 3 cylinder - The clutch has hi/lo range. The Reverse shuttle works fine, but the front shuttle will not work. Do you have any suggestions as to what could be the problem?