Eaton model 7 Hydrostatic transmission


[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ Lawn Tractor / Garden Tractor Discussion Forum ] [ FAQ ]

SSB Farm Tractor Parts, Manuals & Antique TractorsAftermarket Farm & Old Antique Tractor PartsTractor Service, Repair & Owners Operators Manual ShopTractor ImplementsTractor SeatsTractor Front End LoadersPedal Toy Tractors Farm Tractors For Sale ClassifiedsAntique Tractors For Sale ClassifiedsTractors Forum - Help & AdviceTractor, Gardening, Mowers & Outdoor Equipment BooksTractor ProductsContact Us
SEARCH MANUALS
FIND PARTS
How much is your farm tractor worth? Find resale prices for tractors built from 1939 and 2011, with complete specifications and serial numbers. Save 15% on our Official Tractor Blue Book sale!

Search This Message Board:

Eaton model 7 Hydrostatic transmission

Rock I need to know what the differences are inside a clockwise and a counter-clockwise model 7 hydro transmission. Rotating the casing does reverse the output rotation. However there is an unacceptable lost of power and fuild use.

Carl Tunich Do you mean the rotation of the input shaft. From what I have been able to find out that is the only rotation that is specific on the Eaton's.

Eaton has a site where you can see all they publish on the model 6,7,10, and 11 models.

Carl Tunich The drawing that I printed out from Eaton shows that the model 6 and 7 both have the direction/speed control shaft coming out of the front bottom of the hydrostatic transmission. This shaft rotates about 14 degrees clock wise and counter clock wise. As the shaft is rotated from the center point the displacement of the pump is changed. That is how Eaton designed the unit to change direction and speed.

I have a tractor with the Eaton model 11 in it. I just purchased a new one cause my old one had significant wear in it.

I just looked at it and I can't see any difference between what would happen with the input turning cw vs ccw.

Were you able to find the transmissions on the Eaton site?

Randall Kinder The Eaton model 7 hydro-pump on my Simplicity mower (Simplicity pump part # 1700690) is evidently going bad (losing drive power when hot). Where can I get a good price on a new or rebuilt one ? Thanks.
Larry L Gramm Would anyone have an input shaft to an Eaton Model 11 transmssion? Used is OK.
John We stock many whole units and parts for Eaton hydrostatic transmissions including input shafts.

We also stock models 600, 700, 1100, and 1120 series.

paul S. Does anyone have a good diagram or picture of hoew the mounting brackets should look when properly tightened and in place? On my 175, the most rear bracket seems to be loose or broken. It freely moves or pivots and I can see directly into the transmission...is this correct?
Paul S.

Does anyone have a good diagram or picture of hoew the mounting brackets should look when properly tightened and in place? On my 175, the most rear bracket seems to be loose or broken. It freely moves or pivots and I can see directly into the transmission...is this correct?

Tim Meyer Looking for this Eaton pump 1120 005 f021 ccw
Can you get this pump if no please give me a price
This pump is off a CTL TurfRunner Tim 302-275-4878



[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ Lawn Tractor / Garden Tractor Discussion Forum ] [ FAQ ]
Post a Followup

Name:
E-Mail:

Subject:

Comments:

Email Notification: If you check this box, email will be sent to you whenever someone replies to your message. You must include your email address above to receive this notification.


[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ Lawn Tractor / Garden Tractor Discussion Forum ] [ FAQ ]

Name:
Email:  

Sign Up For Our Monthly Special Sales!