Search This Message Board:
JD LX176 Hydrostat will not go forward or reverse
| Sheryl |
My "93" John Deere LX176, with Hydrostat transmission, will not go forward or backwards. It was working fine when I put it into the garage after mowing last week. I check the oil and it is full. The brake is not engaged. Any ideas as to what may be wrong with it? Thank you.
|
| Joe |
Check the following, eng/trans drive belt not broken/off eng pulley,trans not in freewheel(hand push tractor mode)shaft keys that tie wheel hubs/rims to rear axles aren't missing/sheared,if key on either axle missing/sheared,tractor will not move,check shaft keys on eng & trans input pulley,that either isn't sheared
|
| Sheryl |
Thank you, Joe. The drive belt was off of the pulley. I have purchases a new belt and installed it. Quite a job. But the tractor is running. Thank you.
|
Post a Followup