Search This Message Board:
Craftman mower dies when release clutch/engage mower baldes
| Thor wicklund |
I have a newer Craftman mower 917.275972. Engine runs fine but when I release the clutch/or engage mower blades, engine dies. Bypassed the seat switch, installed new clutch swith, no change. The parts manual shows a small black relay, whcih I ordered, but do not see it on the tractor, any ideas of what else I can check? Thanks
|
| Kevin H |
sounds like a short in mower clutch to ground
|
| Joe |
If you installed a jumper in connector in seat sw connector,remove jumper & see if that cures problem,depending how tractor wired with jumper you may be simulating a not sitting on seat condition,check owner's manual for a wiring diag,should tell you if seat sw n/o or nc when seat up,with jumper you're making a n/c condition.
|
| Fred |
You may want to check the fuel pump/diaphram. I've had a couple of these problems and they were doing the same thing you said
|
Post a Followup