|Allis Chalmers||Avery||Bobcat||Case David Brown||Caterpillar||Cockshutt||Deutz||Euclid||Ford||International Farmall|
|John Deere||Kubota||Massey Ferguson||Minneapolis Moline||Mitsubishi Satoh||New Holland||Oliver||White||Zetor||Miscellaneous (OTHER)|
|| SSB Farm Tractor Parts, Manuals & Antique Tractors||| Aftermarket Farm Tractor Parts||| Service & Repair Farm Tractor Manuals ||
|| Tractor Implements||| Tractor Seats||| Trailer Parts||| Tractor Loaders||| PTO Generators||| Rear View Backup Camera ||
|| Pedal Toy Tractors||| Tractor Books||| Tractor Data / Info / Specs||| Tractor Blog||| Antique Tractors History||| Related Sites||| Rustic Home ||
|How much is your farm tractor worth? Find resale prices for tractors built from 1939 and 2011, with complete specifications and serial numbers. Save 15% on our Official Tractor Blue Book sale!|
|Andy||This might save someone a headache. The instructions in the owners manual for my MTD lawn tractor for adjusting the brake disc, which is located on the transaxle, are wrong. They say to loosen the hex nut, set the gap, then retighten the hex nut. Do not retighten the hex nut! The gap between the disc and the puck is set by the position of the hex nut, which is a lock nut. If you retighten it you will be locking up the transaxle and may damage the brake assembly. While it is loose, insert your feeler gauge between the disc and puck and slowly tighten the nut until the feeler gauge sticks a little while removing it. That's it. Hope this helps.
|daviddude||thanx for the info.