Search This Message Board:
loader joy stick bx2200
| alton neidlinger |
is there a way to make the tilt( dump) value a float setting? i mounted a snow blade in place of the bucket. this works great as you can pile snow without driven the front wheels in to the snow pile. but using the loader arms on float position gives the blade alot of weight which causes it to dig into my stone driveway. my other idea is to make the mount for the tilt cylinder on the blade pivot. thanks ahead of time for any ideas. alton
|
| Ross |
You might consider a length of pipe on the bottom edge of the blade. I had a 48" x 1.25"
slotted with a plasma cutter to slide over the cutter bar on my back blade. Welded a flat washer on each end to prevent sliding, and welded a length of chain about 6" from each end to use as attachment points. I used a tarp strap from each chain to the center housing of the back blade. This thing doesn't hinder snow removal but does effectively prevent digging in to the drive and yard.
|
[ 
Save This Page ] [ Follow Ups ] [ Post Followup ] [ Kubota Tractor Discussion Forum ] [ FAQ ]
Post a Followup
