relay?from starter to fuel shut off solenoid

How much is your farm tractor worth? Find resale prices for tractors built from 1939 and 2008, with complete specifications and serial numbers. Save 10% on our Official Tractor Blue Book sale!

Search This Message Board:

relay?from starter to fuel shut off solenoid

rustebad

I bought an f2560e at a sale, came with some issues.
so far I have checked out connections, fuses , fusible fuse, I now have it that I can start it, but without the fuel solenoid in place.The solenoid does not stay retracted to allow the mower to start.
AS I understand it, there needs to be current to the solenoid to keep pin retracted while mower is running. I can runi without the solenoid and stop iy with the kill switch. What am I missing

Butch

The older models have current to the valve while
running. You should have current on the valve
wire after it starts. If not, check the switch
to see why it doesn't have current. You could
move the wire to the run side of the switch on
a good terminal that goes off when the switch is turned off.
The newer models do not have current on the
valve all the time. I think it gets a shot of
current when it's turned on to pop the valve
into the correct position, then a shot of current to pop the valve back off when turned
off.

[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ Kubota Tractors Discussion Forum ]
Post a Followup

Enter Code Shown Above As it Appears:
Name:
E-Mail:
Subject:

Upload Picture (Optional - Choose File):

Comments:

Name:

Email:

Sign Up For Our Monthly Special Sales!