| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Aftermarket Tractor Parts | | Tractor Service & Repair Shop Manuals | |
| | Tractor Implements | | Tractor Seats | | Trailer Parts | | Tractor Loaders | | PTO Generators | | Rear View Backup Camera | |
| | Pedal Toy Tractors | | Tractor Books | | Antique Farm Tractors Blog | | Antique Tractors History | | Rustic Home | |
| How much is your farm tractor worth? Find resale prices for tractors built from 1939 and 2008, with complete specifications and serial numbers. Save 10% on our Official Tractor Blue Book sale! |
Search This Message Board:
TG1860 FUEL PUMP
| BILLY ZINGER | I have a tg1860. The fuel pump was not pumping. I took it off and located the actuator rod the pumps the pump. When turning the key the rod does not move. The fan turns. After removing the spark plug i noticed the engine has compression. It seems the the fuel pump rod would be able to pull out of the engine if i tried. Can any one tell me how the engine works the rod and why it would pump the pump? Thanks, billy |
| Sam | That sounds like a mechanical fuel pump. The push rod your talking about most of the time will pull out with the pump off. The internal end of the push rod works on a cam. As the engine turns the cam rotates and the push rod goes in and out, the exposed push rod end fits on a plunger on the fuel pump. The rod pushes on the plunger causing the pump to operate. The rod wont move by just turning on the switch, the engine has to rotate. The rod may not move at all with the pump off, the pump has a spring loaded diaphram that pushes and holds the push rod next to the cam. The pump would be bad not the push rod in most cases. |
Post a Followup
