Search This Message Board:
b2620 60" MMM
| rickret |
The mower deck will not hold height adjustment when lowered. A new cam was installed by the dealer and it worked for about 1 hour and then started letting the deck drop again. Has any one else had this problem and what was the cure?
|
| jake |
I HAD THE SAME PROBLEM . DOUBLE UP THE SPRING THAT RIDES IN THE SO CALLED DETENTES , HOLD THE 2ND SPRING BACK JUST A BIT . THIS REALLY HOLDS TIGHT . ALSO PUT A PLASTIC WASHER ON TOP OF THE STEEL WASHER,THIS ALSO HELPS IT OUT .
|
| rickret |
Thanks for the info, just got it back from the dealer today. They stated that they put a bushing on the adjustment knob/cam, and that tightened up the slack in the knob and the cam lines up on detent bar now. It has worked fine for a couple of hours now.
|
Post a Followup