rx75 belt problem/diagram?


[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ John Deere Tractor Discussion Forum ] [ FAQ ]

SSB Farm Tractor Parts, Manuals & Antique TractorsAftermarket Farm & Old Antique Tractor PartsTractor Service, Repair & Owners Operators Manual ShopTractor ImplementsTractor SeatsTractor Front End LoadersPedal Toy Tractors Farm Tractors For Sale ClassifiedsAntique Tractors For Sale ClassifiedsTractors Forum - Help & AdviceTractor, Gardening, Mowers & Outdoor Equipment BooksTractor ProductsContact Us
SEARCH MANUALS
FIND PARTS
How much is your farm tractor worth? Find resale prices for tractors built from 1939 and 2011, with complete specifications and serial numbers. Save 15% on our Official Tractor Blue Book sale!

Search This Message Board:

rx75 belt problem/diagram?

mary Hi I hope someone can help me. I have an old jd rx75 mower. The Motor runs like a sewing machine. Recently I had the belts replaced, and since I did that I have had nothing but trouble. Within an hour or two each time the belt either jumps off the mower or off the drive, sometimes both. All belts have been replaced 5 times now with the same result. Before I had used the tractor for 5 years with no belt problems.

I have a guy who seems reliable doing the work, but I'm wondering if anyone can point me to a diagram on how the belts should be trheaded or can anyone think of a reason why this would happen over and over? it is very frustrating. thank you for your help.

Greg The belts should have guides that hold the belt almost touching the spindles. The giudes may have gotten bent back when the new belt was installed. You should have them on the front and rear of each pulley/ allow about 1/4 ich from the pulley. This is should help you out.
Herb I have the same problem with my rx 75. but now I also need A diagram or description on how the belt goes on the 30" deck
corey ood I need a belt pattern diagram for the rx75 john deere. 30 inch deck.
Tomw Go to deereparts.com, Look in the parts catalog for an rx75. You can view the deere parts diagrams there.
debi I have been having trouble on how to re-apply the belt to my jd rx75. does anyone have a diagram showing how this should be done?
TOM CAN ANYBODY SEND ME A BELT DIAGRAM FOR A RX75 MOWER DECK?
Jon How do I put the belt on my rx75 riding lawn mower??
Billy I have a belt diagram for the RX75,If anyone needs it.
Jim M Does anyone have a download for bet diagram for rx75 john deere?
Jim M Does anyone have a download for belt diagram for rx75 john deere?
Billy Thomas I e-mail a lot of people a picture of the belt diagram for the RX75 mower if anyone saved it can you send me a picture of it,I lost my picture of it when I got a new pc Thank You
Billy
Re: rx75 belt problem/diagram?

I found it

Erwin Taper I hope that some one can help me with my problem, every time when I move the shift lever from mutual and put into gear and let the clutch out the Tractor will not move forward,or reverse.I have spoken to some of the Lawn Mower shops in my area,and no one knows what the problem is with my John Deere RX75
Regards and thanks for helping out.
Erwin, Korean Veteran



[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ John Deere Tractor Discussion Forum ] [ FAQ ]
Post a Followup

Name:
E-Mail:

Subject:

Comments:

Email Notification: If you check this box, email will be sent to you whenever someone replies to your message. You must include your email address above to receive this notification.


[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ John Deere Tractor Discussion Forum ] [ FAQ ]

Name:
Email:  

Sign Up For Our Monthly Special Sales!