Save This Page ] [ Follow Ups ] [ Post Followup ] [ John Deere Tractor Discussion Forum ] [ FAQ ] Save This Page ] [ Follow Ups ] [ Post Followup ] [ John Deere Tractor Discussion Forum ] [ FAQ ]
| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Aftermarket Tractor Parts | | Tractor Service & Repair Shop Manuals | |
| | Tractor Implements | | Tractor Seats | | Trailer Parts | | Tractor Loaders | | PTO Generators | | Rear View Backup Camera | |
| | Pedal Toy Tractors | | Tractor Books | | Antique Farm Tractors Blog | | Antique Tractors History | | Rustic Home | |
| How much is your farm tractor worth? Find resale prices for tractors built from 1939 and 2008, with complete specifications and serial numbers. Save 10% on our Official Tractor Blue Book sale! |
| paul | I have a John deere 316 lawn mower...The PTO cluch will not stay on....I have tried the battery..ajdusting the clutch..a new switch..a new voltage reg...and nothing...it seems to be something ele..the battery light stays on and will not go off...if by some chance it does flicker off then the deck will run ...Please help
|
| Dave | Paul - The fact the battery light stays on, indicates the voltage is low. Either the voltage regulator, stator, or time delay module (if it's an Onan powered 316) could be at fault. At full throttle, check the voltage at the battery. It should be up over 13.5 volts (14.5 would be better). If not, I would check the voltage coming off the regulator/rectifier, again at full throttle. You should get 14+ volts DC. There should also be two leads at the regulator that come from the stator. These two leads should provide at least 28 volts AC (that's right AC). If you locate the problem as the regulator or the stator, you'll need to replace the proper components. Should they both check O.K., the time delay module may be defective (big bucks). If the problem with the clutch continues, it's possible the clutch itself is weak and needs replacment. - Dave
|
| RANDY | WHERE IS THE STATOR LOCATED ON THE 316 WITH THE 16 HP ONAN??? I'M WORKING ON AN OLD 110 AND THAT IS CONNECTED TO THE FLY WHEEL, IS THE ONAN THAT WAY ALSO??? THANKS RANDY
|
Save This Page ] [ Follow Ups ] [ Post Followup ] [ John Deere Tractor Discussion Forum ] [ FAQ ]