Search This Message Board:
445 john deere PTO wont engage need wiring diagram
| Bill Pugh |
I have a 445 JD with 500 hours. It has never sputtered in its life and mows 4 acres a week. Lately I noticed when mowing the PTO would quit and I would back up and start all over with no problem. Started it Tuesday to mow and it was dead on one cylinder. Replaced coil on left bank and serviced the tractor and went mowing. 3/4 way through the PTO quit and would not restart the blades. I figured it was the switch because it is used a bunch but that didnt fix it. all the safety switches function. No voltage to the solenoid.The new switch had been opened before but looked new. need wiring diagram. Thanks
|
| Kathy |
Did you ever find a wiring diagram for this unit? I have the same problem and could use a copy of the diagram...thanks
|
| Erin |
Check the safety switches, sometimes they get bumped and out of alignment. check the one on the frame just under the rear right axle.
|
Post a Followup
