Search This Message Board:
john deere320
| dennis |
while moving my hdro lift for the mover deck became very loose and will not lift or lower the deck. It is in the down position. the handle is attached but looks like the cylinder is in the out position. Do i need to replace the unit the handle is attached to.
|
| Dave |
Dennis - I imagine what has happened, there is a small link (P/N M77311) that connects the hyro lever to the valve. This is located up under the fender deck, just above the rear tire. It's sort of a "U" shaped piece that goes through a small hole in the lever and a small hole in the valve. A small hairpin (P/N R50647) on each leg of the link, retains the link in place. Either the link has broken, or one or both of the hairpins is missing, and has allowed the link to come loose. - Dave
|
Post a Followup