||I have A new John Deere 2520 compact utility tractor with a 62D on ramp mower. The gusge wheel on the right of the deck will move sideways when cutting and stay there.Then when it touches the ground again the wheel tears the grass up and will not straighten out unless you stop the tractor and get off and starighten it with your hands. It also bend the deck because ther is no support for the bracket for the wheel.The left front has the same design but does not pose as much of a concern. Any suggestions?Dealer says they have never seen anything like this.
||Double check that the spindle shaft has grease in it. Try raising the wheel about a 1/4" off the ground. This is a floating deck design, the wheels are to guide you over high and low spots on the ground, to prevent scalping. Hope this offers some help
||well your dealer must have only sold 1 of these in your area i have 1 with 10 hours on it and this deck has been nothing but a pain also i know 2 other people with the same setup and we are all having the same problems and mine has just about cut the inner sidewalls of the rear tires from the deck lift link arms swinging out when turning and my dealer is aware of this but no fix from deere at this time am considering a rear finish mower or a kubota good luck on yours