ORC removal

How much is your farm tractor worth? Find resale prices for tractors built from 1939 and 2008, with complete specifications and serial numbers. Save 10% on our Official Tractor Blue Book sale!

Search This Message Board:

ORC removal

tonebone	I removed my pto shaft to replace the seal and now I cannot get the ORC off. I removed the grease fitting and the plug and there appears to be no pin. I drove a punch through to be sure. I can see through the hole, but the ORC wont come off. Any suggestions? Thanks......Tonebone
Billy	There is a pin there it is a roll pin which is hollow in the center. You will need to find a punch the same size as the outer diameter of the pin. If you can get some of the grease out of the hole you will see what to do a little easier.
tonebone	thanks for the reply, I will check and see if it is a rolled pin or not......Tonebone

[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ Ford Tractors & New Holland Tractors Discussion Forum ]
Post a Followup

Enter Code Shown Above As it Appears:
Name:
E-Mail:
Subject:

Upload Picture (Optional - Choose File):

Comments:

Name:

Email:

Sign Up For Our Monthly Special Sales!