1086 TA (1981)

How much is your farm tractor worth? Find resale prices for tractors built from 1939 and 2008, with complete specifications and serial numbers. Save 10% on our Official Tractor Blue Book sale!

Search This Message Board:

1086 TA (1981)

Mike	I think my TA is stuck on the low side even though the lever is in high. Could this be a hydraulic problem?? The tractor was "freewheeling" going down hill. This happens with my 656 but was told it shouldn't happen with the 10? Could the cable be separated/broke or a similar problem. The TA was not supposed to be very old. Supposedly replaced with a lifetime.
jim	First thing, is to check that ta lever and cable are moving ta selector valve in mcv to full positions both ways, may have just slipped out of the cable clamp. If it is in middle you will operate in ta and also free wheel.
Mike	Thank you Jim. After removing the engine tin I found the 90 degree bolt on the adjusting rod broken.
Mike	Thank you Jim. After removing the engine tin I found the 90 degree bolt on the adjusting rod broken.

[ Save This Page ] [ Follow Ups ] [ Post Followup ] [ International Farmall Tractors Discussion Forum ]
Post a Followup

Enter Code Shown Above As it Appears:
Name:
E-Mail:
Subject:

Upload Picture (Optional - Choose File):

Comments:

Name:

Email:

Sign Up For Our Monthly Special Sales!