||Request information on how to remove air from the fuel line so the fuel system will be primed and engine will start. The Iseki TL-2701 has a 3 Cylinder Diesel Engine. Info most appreciated. Thx, Tom
||Answers to some of these often asked questions can be found at http://groups.msn.com/SheaffersTownCountryTractors/messages.msnw. I wiil add more answers as questions are asked.
When running a diesel out of fuel or when changing the filter air gets in the fuel system & must be bled. On most Japanese tractors there are bleed screws on the fuel filter assembly & the injector pump. Start at the fuel tank & work towards the injector pump.. Crack open each screw enough for fuel to come out . Close when no more air bubbles appear. On many tractors these are 10mm hex heads with Phillips slots. On some newer models there are plungers to push instead of screws. Once these points have been bled the tractor is ready to start.
||Iam having the same problem except tractor is a gravity feed tc30 new Holland how do i bleed air
| dwain taylor
||Will the same procdure work with a iseki tu1900