Search This Message Board:
1957 D-8 14A main drive clutch
| David Briggs |
How do you adjust the main drive clutch. It will not stay engaged or lock in.
|
| hector gemme |
You need to removed the floor plate inpection cover and turn the flyweel until the adjustement locknut is accessible. Loosen the looknut about two turns and tap lock plate sligtly to be sure it is free onstud. Rotate flywhell 180' and loosen the other locknut in same .Turne the adjusting ring clockwise approximately three inchs to tighten. Tighten the locknuts to a torque 80 pound feet.
|
Post a Followup
