| IBUILDCARS4U |
need some help please. i have just bought a mid 70's ford 4500 backhoe. on the rear of the tractor where the backhoe attaches to the tractor on the bottom, there is 2 { i dont know what they are called or how to describe them} upside down " c " brackets that hold the 2 bottom pins of the backhoe. 1 c bracket is broken off, when you go to use the backhoe, the pin pops out of the bracket causing the backhoe attachment to fall down. what is the name for these brackets? and do they sell replacement parts? or do i have to fab my own? any help would be appreciated. dont know much about backhoes, but i am learning, thank you for your time and help.
|
| John Cina |
I made one from about 1" thick steel ----- drilled a hole to size ------ than sawed in to . Plus I welded a small piece over the top. Been working until the torque converter broke...
|
| DENNIS SPEED |
THERE WERE 2 DIFFERENT LENGTH ARMS USED FORD PART #7703521 15 1/4" LONG SECURING CLEVIS ARM (NO LONGER SERVICED)& A 18 3/4"ARM PART NUMBER D7NNB511A THAT IS STILL SERVICED FOR $149.67
|
| Ron M oreland |
i have two 4500 backhoes one i am parting out you can ccll me 813-404-7466
|
| PETE KAMPER |
HI,NEED HELP! HAVE A 1972 FORD 3000 WITH BACKHOE FRONT LOADER ATTACHMENTS. NEED A CIRCUIT RELIEF VALVE FOR THE CROWD CYL, HUSCO PSL 3500472 PART#4545N,I BELIEVE THE FORD # IS 291741.CAN I GET A NEW RELIEF VALVE SOME WHERE?CAN I GET THE OLD ONE REBUILT SOMEWHERE,OR DO I HAVE TO SEND THE WHOLE CONTROL VALVE OUT TO BE REBUILT?ANY AND ALL INFO IS GREATLY APPRECIATED. THANKS PETE
|
Save This Page ] [ Follow Ups ] [ Post Followup ] [ Antique Tractor Discussion Forum ] [ FAQ ]