Save This Page ] [ Follow Ups ] [ Post Followup ] [ Massey Ferguson Tractor Discussion Forum ] [ FAQ ] Save This Page ] [ Follow Ups ] [ Post Followup ] [ Massey Ferguson Tractor Discussion Forum ] [ FAQ ]
| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Tractor Parts | | Tractor Manuals | | Tractor Implements | | Tractor Seats | |
| | Rear View Backup Camera | | Pedal Toy Tractors | | Tractor Loaders | | PTO Generators | | Fuel Saver Efficiency Additive | |
| | Rustic Home Decorating & Decor | | Tractor Books | | Trailer Parts | | Antique Farm Tractors Blog | | Antique Tractors History | |
In Reply to: Hydraulic pump question....... posted by David Baker on Thursday, April 24, 2008:
Hi David, you should be able to see what is leaking by removing the plate on the right side of tranny, the one with the dipstick in it, you will need to remove this anyway to disconnect the control arm if removing the lift cover, first drain oil down to lower bolt hole, then with engine running, draft lever fully up, raise the position control lever and look inside with a flashlight, oil streaming down from the top rear will indicate piston leakage, major turbulence in bottom corner will be pump leaking. Also check that the roller is sitting between the 2 upright forks of the control lever and that the arms move back and forth when you move the position control. HTH.