| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Aftermarket Tractor Parts | | Tractor Service & Repair Shop Manuals | |
| | Tractor Implements | | Tractor Seats | | Trailer Parts | | Tractor Loaders | | PTO Generators | | Rear View Backup Camera | |
| | Pedal Toy Tractors | | Tractor Books | | Antique Farm Tractors Blog | | Antique Tractors History | | Rustic Home | |
Search This Message Board:
Posted by Matt on Monday, August 31, 2009:
My tractor will not start now. It was sitting for some time and had water in the fuel system. I could turn it over with starting fluid before cleaning the water out but once I cleaned the fuel system it will not start.
The solenoid just clicks when turning the key to start. I have bypassed the seat and brake/neutral safety switches and still no turn over. I am looking to find the wiring diagram for the PTO switch to jump that out.
Also, if I try to turn the starter over with 12v direct to lug on housing, it will not turn over. but if I remove the starter from the motor it does spin free with 12v applied to lug.
The motor DOES spin freely! I can spin it using a wrench on lower bolt to flywheel.
Any ideas? Thanks for all help!!!
- Re: Craftsman 917258873 /Koehlor 18hp will not start Matt Wednesday, September 02, 2009
(0)
- Re: Craftsman 917258873 /Koehlor 18hp will not start Joe Tuesday, September 01, 2009
(0)
- Re: Craftsman 917258873 /Koehlor 18hp will not start Matt Tuesday, September 01, 2009
(1)
- Re: Craftsman 917258873 /Koehlor 18hp will not start Joe Tuesday, September 01, 2009
(0)
- Re: Craftsman 917258873 /Koehlor 18hp will not start Joe Monday, August 31, 2009
(1)
Post a Followup
