| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Aftermarket Tractor Parts | | Tractor Service & Repair Shop Manuals | |
| | Tractor Implements | | Tractor Seats | | Trailer Parts | | Tractor Loaders | | PTO Generators | | Rear View Backup Camera | |
| | Pedal Toy Tractors | | Tractor Books | | Antique Farm Tractors Blog | | Antique Tractors History | | Rustic Home | |
Search This Message Board:
Posted by Bill Pugh on Thursday, August 27, 2009:
I have a 445 JD with 500 hours. It has never sputtered in its life and mows 4 acres a week. Lately I noticed when mowing the PTO would quit and I would back up and start all over with no problem. Started it Tuesday to mow and it was dead on one cylinder. Replaced coil on left bank and serviced the tractor and went mowing. 3/4 way through the PTO quit and would not restart the blades. I figured it was the switch because it is used a bunch but that didnt fix it. all the safety switches function. No voltage to the solenoid.The new switch had been opened before but looked new. need wiring diagram. Thanks
- Re: 445 john deere PTO wont engage need wiring diagram Erin Thursday, October 29, 2009
(0)
- Re: 445 john deere PTO wont engage need wiring diagram Kathy Thursday, October 08, 2009
(0)
Post a Followup
