Save This Page ] [ Follow Ups ] [ Post Followup ] [ International Farmall Tractor Discussion Forum ] [ FAQ ] Save This Page ] [ Follow Ups ] [ Post Followup ] [ International Farmall Tractor Discussion Forum ] [ FAQ ]
| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Tractor Parts | | Tractor Manuals | | Tractor Implements | | Tractor Seats | |
| | Rear View Backup Camera | | Pedal Toy Tractors | | Tractor Loaders | | PTO Generators | | Fuel Saver Efficiency Additive | |
| | Rustic Home Decorating & Decor | | Tractor Books | | Trailer Parts | | Antique Farm Tractors Blog | | Antique Tractors History | |
In Reply to: Re: need hydraulic help posted by Gus on Monday, February 18, 2008:
I have a manual coming, I took the linkage off from the levers and the arms on the side of the valves that make the bucket go up or down are stuck solid on all three valves. this must be a plain 300 as there is a plate (4 bolt) in front of the brake pedals and what looks like a freeze plug in front of the clutch pedal. the levers move freely since I have unhooked the linkage and the problem is in the valves themselves (I think) and by froze up I mean they will not move. The front end loader is not on it but the cyl. that raises and lowers the hitch should work. I have converted it to 12 volt and as I was letting it run I noticed the hyd. lines from the pump were to hot to touch, is this normal. thanks for answering my questions