Save This Page ] [ Follow Ups ] [ Post Followup ] [ International Farmall Tractor Discussion Forum ] [ FAQ ] Save This Page ] [ Follow Ups ] [ Post Followup ] [ International Farmall Tractor Discussion Forum ] [ FAQ ]
| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Tractor Parts | | Tractor Manuals | | Tractor Implements | | Tractor Seats | |
| | Rear View Backup Camera | | Pedal Toy Tractors | | Tractor Loaders | | PTO Generators | | Fuel Saver Efficiency Additive | |
| | Rustic Home Decorating & Decor | | Tractor Books | | Trailer Parts | | Antique Farm Tractors Blog | | Antique Tractors History | |
In Reply to: need hydraulic help posted by Robert Horton on Monday, February 18, 2008:
Robert: I'm suggesting you buy yourself an original IH operators manual. To start with hydraulics don't freeze unless they are full of water. If there is enough water in there and it is cold enough to freeze up the entire system, you have two choices; find a heated shop and it will take 3-4 days to thaw out vital points in the system, or wait for summer. Once you have it thawed drain the oil clean or replace the screen and replace the oil with new Hytran.
You don't say whether the 300 is Farmall or Utility, thus it's rather difficult to tell you where the filter is as they are different. It isn't a filter anyhow, just a cylinder type screen and on the Farmall it's just ahead of clutch pedal, circular device held in place by 4 small bolts. I believe the screen is under the seat on a Utility, same type screen held in by 4 bolts.