| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Aftermarket Farm Tractor Parts | | Service & Repair Farm Tractor Manuals | |
| | Tractor Implements | | Tractor Seats | | Trailer Parts | | Tractor Loaders | | PTO Generators | | Small Engines | | Rear View Backup Camera | |
| | Pedal Toy Tractors | | Tractor Books | | Tractor Data / Info / Specs | | Tractor Blog | | Antique Tractors History | | Related Sites | | Rustic Home | |
SEARCH MANUALS ![]() | FIND PARTS ![]() |
Hello,
I was doing a lot of digging with my loader the other day when one of the main lift flex lines blew. I have a lot of work to finish so I ran down and got a replacement hose immediately. I installed it and had enough movement to raise the loader all the way up with the engine revved. After extending all hydraulic cylinders, and raising the three point hitch I shut her down and topped off the fluid. Now the big problem. The three point lift works great, and the bucket tilt works perfectly. When I go to lift the loader however it will either not lift or move very slow if I rev the engine way up. I've tried over and over with no luck or improvement. I even bled the pump on the left side of the engine to no avail. The only thing strange that I have observed is that when I try to lift the loader the flex line on the left side jumps a little. The one on the side that has been replaced doesn't seen to move at all.
If anyone can help it would be great. I don't have a clue where to go at this point though I'd rather repair it myself if possible.
Thanks,
David
- Re: 3400 loader won't work after hose change. Please help! Mike O Sunday, September 06, 2009
(0)
- Re: 3400 loader won't work after hose change. Please help! vaan eyk Monday, April 27, 2009
(1)
- Re: 3400 loader won't work after hose change. Please help! David Friday, May 01, 2009
(0)
- Re: 3400 loader won't work after hose change. Please help! David Friday, May 01, 2009
(0)
Post a Followup
SEARCH MANUALS 
