| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Aftermarket Farm Tractor Parts | | Service & Repair Farm Tractor Manuals | |
| | Tractor Implements | | Tractor Seats | | Trailer Parts | | Tractor Loaders | | PTO Generators | | Small Engines | | Rear View Backup Camera | |
| | Pedal Toy Tractors | | Tractor Books | | Tractor Data / Info / Specs | | Tractor Blog | | Antique Tractors History | | Related Sites | | Rustic Home | |
 SEARCH MANUALS  | FIND PARTS |
In Reply to: CATERPILLAR DIRECT ELECTRIC CONVERSIONS posted by LEROY'S USED PARTS on Thursday, October 01, 2009:
My friend in mine experience i not recommend the elimination the pony motor , Is dependable and sure source start in cold weather
But I do a electric convertion the cat 12 grader
and D4U 4/1/2 engines
The electric starter Leece Neville 24V from a Cummins JT which made new start pinion wich theet compatible with the flaywheel crown. Or reemplace the flywheel crown by another suitable straight teeth The precombustion chamber was remplaced by chamber with electric heather from a cat D333 Battery 2 of 12 v 180 amp the interruptor swich for the heather.from a cat D333
If you motor is a stationary type the fuel supply tank must be instalate at 4" inch below the
inyector fuel level in a full fuel condition
by this mode avoid the fuel trasnfer pump starvation failure and entry air in the system
Resume: a electric starter 24V from a diesel engine as Cummins GM or Cat D333 with a new start bendix pinion compatible with the crown teeth
Pre chambers with glow suitable at you cat engine
Glow heather 24V
A swhich for electrical connection at the glows
2 battery 12V 160 180 amp
Elevate de fuel tank ,only if a stationary engine
Operate very well .and the starting procedure is
some another engine Cat with electric start device
Post a Followup
