Save This Page ] [ Follow Ups ] [ Post Followup ] [ Caterpillar Tractor Discussion Forum ] [ FAQ ]
| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Tractor Parts | | Tractor Manuals | | Tractor Implements | | Tractor Seats | |
| | Rear View Backup Camera | | Pedal Toy Tractors | | Tractor Loaders | | PTO Generators | | Fuel Saver Efficiency Additive | |
| | Rustic Home Decorating & Decor | | Tractor Books | | Trailer Parts | | Antique Farm Tractors Blog | | Antique Tractors History | |
In Reply to: D47U Dozer posted by Duane Scott on Wednesday, June 11, 2008:
looks like yours is a d315 engine. that is a four cylinder 4.5 x 5.5 firing order 1-3-4-2
valves hot are adjusted at .010 inches.
cylinder head torque 1/2" nuts first time to 42 lb.ft. 5/8" nuts first torque 90 lb. ft.
secound torque to 1/2 inch nuts 58 lb.ft. then the 5/8 inch nuts to 130 lb.ft.
expected tighness after run awhile 1/2 inch nuts 46 lb.ft. and 5/8 inch nuts 110 lb. ft.
The bolt for the chamber removal tooling is a 1a2208. the tool that looks like a nozzle or is called a spacer 5f9072. and the spline tool is 5f8353 wrench. they show the numbers for the installing tool for the reainer top of chamber as l-1017 nut, 6f5515 screw, and a 4b4285 washer.
this is hopefully what you were looking for, dug deep in the files on this one.
Save This Page ] [ Follow Ups ] [ Post Followup ] [ Caterpillar Tractor Discussion Forum ] [ FAQ ]