Save This Page ] [ Follow Ups ] [ Post Followup ] [ Caterpillar Tractor Discussion Forum ] [ FAQ ] Save This Page ] [ Follow Ups ] [ Post Followup ] [ Caterpillar Tractor Discussion Forum ] [ FAQ ]
| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Tractor Parts | | Tractor Manuals | | Tractor Implements | | Tractor Seats | |
| | Rear View Backup Camera | | Pedal Toy Tractors | | Tractor Loaders | | PTO Generators | | Fuel Saver Efficiency Additive | |
| | Rustic Home Decorating & Decor | | Tractor Books | | Trailer Parts | | Antique Farm Tractors Blog | | Antique Tractors History | |
In Reply to: Re: 941B weld on sprocket ring posted by Nick Follmer on Wednesday, May 23, 2007:
Thanks to all who responded all information was a great help. I welded three tabs on the sprocket ring 120 degrees apart and drilled 1/2 inch holes in the other end. I put the ring in place and drilled the 1/2 inch holes through the original spokes. I fastened it with 1/4 inch bolts and fender washers. This allowed me to safely make adjustments and shim the runout and also run the tractor to check the sprocket before welding.
Thanks,
Joe