Re: Installation tools re injecter pump(fuel )

[ Follow Ups ] [ Post Followup ] [ Case Tractor Discussion Forum ] [ FAQ ]

Hop To Another Discussion Forum:
SSB Tractor (ssbtractor.com)Your Farm Tractor Supply Headquarters
Allis ChalmersAveryBobcatCase / David BrownCaterpillarCockshuttDeutzEuclid FordInternational Farmall
John DeereKubotaMassey FergusonMinneapolis MolineMitsubishi / SatohNew Holland OliverWhiteZetorMiscellaneous
HomePartsManualsProductsFeaturesContact Us
Antique Tractors ClassifiedsTractors ForumTractor BooksFarm Tractors Photo Classifieds
| SSB Tractor Home | Tractor Parts | Tractor Manuals | Tractor Seats | Tractor Implements | Rear View Backup Cameras |
| Pedal Toy Tractors | Backhoe Loaders | Front End Loaders | PTO Generators | Antique Tractors History | Related Links |

Search for:   Model (Ex. 8N, 9N, 600, 800):  
Search for Tractor Parts:Tractor Part (Use singular keywords... for example, "radiator" as opposed to "radiators"):

Search This Message Board:
Posted by AJ on Friday, March 21, 2008:

In Reply to: Installation tools re injecter pump(fuel ) posted by Bob McClennon on Friday, March 21, 2008:

Best bet for the tools is the local fuel injection shop,a one off job I would use them to do the rebuild as they will have all the tools,phasing and calibration equipment,to remove the pump a plate directly in front of it on the rad side of the timing cover has to be removed and the gears that drive the pump brought round till the timing match marks line up,then undo the nut on the pump shaft that secures the drive gear,a puller may be needed to break the taper,disconnect all the controls and fuel lines,undo the pump mounting nuts and the pump will lift off,the pump drive gear is best kept in mesh to avoid having to line anything up,the engine must not be turned so take the ground lead off the battery.
AJ

Follow Ups:


Post a Followup



Enter Code Shown Above Exactly As it Appears:
Name:
E-Mail:

Subject:

Comments:

[ Follow Ups ] [ Post Followup ] [ Case Tractor Discussion Forum ] [ FAQ ]