Re: Case 850 Dozer

[ Follow Ups ] [ Post Followup ] [ Case Tractor Discussion Forum ] [ FAQ ]

Hop To Another Discussion Forum:
SSB Tractor (ssbtractor.com)Your Farm Tractor Supply Headquarters
Allis ChalmersAveryBobcatCase / David BrownCaterpillarCockshuttDeutzEuclid FordInternational Farmall
John DeereKubotaMassey FergusonMinneapolis MolineMitsubishi / SatohNew Holland OliverWhiteZetorMiscellaneous
HomePartsManualsProductsFeaturesContact Us
Antique Tractors ClassifiedsTractors ForumTractor BooksFarm Tractors Photo Classifieds
| SSB Tractor Home | Tractor Parts | Tractor Manuals | Tractor Seats | Tractor Implements | Rear View Backup Cameras |
| Pedal Toy Tractors | Backhoe Loaders | Front End Loaders | PTO Generators | Antique Tractors History | Related Links |

Search for:   Model (Ex. 8N, 9N, 600, 800):  
Search for Tractor Parts:Tractor Part (Use singular keywords... for example, "radiator" as opposed to "radiators"):

Search This Message Board:
Posted by AJ on Monday, January 28, 2008:

In Reply to: Case 850 Dozer posted by jean claude marleau on Sunday, January 27, 2008:

That machine should have pressure gauges for the torque and transmission as well as temperature for the torque,knowing the readings would help,ie is the oil getting too hot,is there a loos of pressure showing on one of the gauges or both,the problem is typical of pressure loss as the oil gets thinner as it heats up,it could be the pump is worn or the relife valve is letting the oil by pass,look down through the floor plates,if you can see the shaft that goes from the torque to the transmission watch it and see if it is slowing down with the machine,if it is the problem is torque related,if not the issue is in the transmission,you need to know that there is enough oil pressure to feed the torque convertor and enough to engage the clutches fully so they do not slip.
AJ

Follow Ups:


Post a Followup



Enter Code Shown Above Exactly As it Appears:
Name:
E-Mail:

Subject:

Comments:

[ Follow Ups ] [ Post Followup ] [ Case Tractor Discussion Forum ] [ FAQ ]