Re: case 430 generater wiring

[ Follow Ups ] [ Post Followup ] [ Case Tractor Discussion Forum ] [ FAQ ]

Hop To Another Discussion Forum:
SSB Tractor (ssbtractor.com)Your Farm Tractor Supply Headquarters
Allis ChalmersAveryBobcatCase / David BrownCaterpillarCockshuttDeutzEuclid FordInternational Farmall
John DeereKubotaMassey FergusonMinneapolis MolineMitsubishi / SatohNew Holland OliverWhiteZetorMiscellaneous
HomePartsManualsProductsFeaturesContact Us
Antique Tractors ClassifiedsTractors ForumTractor BooksFarm Tractors Photo Classifieds
| SSB Tractor Home | Tractor Parts | Tractor Manuals | Tractor Seats | Tractor Implements | Rear View Backup Cameras |
| Pedal Toy Tractors | Backhoe Loaders | Front End Loaders | PTO Generators | Antique Tractors History | Related Links |

Search for:   Model (Ex. 8N, 9N, 600, 800):  
Search for Tractor Parts:Tractor Part (Use singular keywords... for example, "radiator" as opposed to "radiators"):

Search This Message Board:
Posted by AJ on Saturday, January 26, 2008:

In Reply to: case 430 generater wiring posted by Spike on Saturday, January 26, 2008:

Haven't got a diagram but can tell you how, from the plus side of the ammeter to the Bat terminal of the regulator 10Ga wire,from the ARM or GEN terminal on the reg to the A or ARM terminal on the generator 10Ga wire,from the F,Fld or Field terminal on the reg to the F or Fld terminal on the generator 10GA wire ,a common ground wire from the generator to the reg to the frame or engine 10Ga wire,you may need to polarize the generator after installing it,to polarise you momentarily connect a jumper wire between the BAT terminal and the ARM or GEN terminal on the regulator,just tip the wire it only takes a millisecond.
AJ

Follow Ups:


Post a Followup



Enter Code Shown Above Exactly As it Appears:
Name:
E-Mail:

Subject:

Comments:

[ Follow Ups ] [ Post Followup ] [ Case Tractor Discussion Forum ] [ FAQ ]