| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Aftermarket Farm Tractor Parts | | Service & Repair Farm Tractor Manuals | |
| | Tractor Implements | | Tractor Seats | | Trailer Parts | | Tractor Loaders | | PTO Generators | | Small Engines | | Rear View Backup Camera | |
| | Pedal Toy Tractors | | Tractor Books | | Tractor Data / Info / Specs | | Tractor Blog | | Antique Tractors History | | Related Sites | | Rustic Home | |
 SEARCH MANUALS  | FIND PARTS |
In Reply to: 580 C Fluid coming out the blow-by tube posted by Shawn on Monday, September 14, 2009:
The main hydraulic oil cannot get into the engine,the power steering fluid can and so can diesel,you say in your last post you are losing PS fluid so thats a good place to start,order yourself 1# A50421 seal,1# A42242 filter element and 1# A30042 gasket,that for the PS pump,remove the pump and take off the drive gear,prise out the old seal and fit the new one,take the reservoir off and fit a new filter element and o'ring,pump back on,fill it with fluid job done,there are two different hydraulic pumps,Cessna requires seal # A25139,the TRW one needs D52477,remove the pump in either case,prise out the old seal and tap in the new one squarely,use a piece of pipe or a deep socket with no sharp edges and as close as possible to the OD of the seal,you can get those parts from EPS,thats an acronym for equipment parts source dot com,go to their site and you can use the part numbers above to search their database.
AJ
Post a Followup
