| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Aftermarket Tractor Parts | | Tractor Service & Repair Shop Manuals | |
| | Tractor Implements | | Tractor Seats | | Trailer Parts | | Tractor Loaders | | PTO Generators | | Rear View Backup Camera | |
| | Pedal Toy Tractors | | Tractor Books | | Antique Farm Tractors Blog | | Antique Tractors History | | Rustic Home | |
Search This Message Board:
Posted by Roger on Sunday, August 23, 2009:
We had our motor rebuilt, all wires are new, new solenoid, new starter, in fact everything is new and yet we cannot seem to get it started. We replaced starter button, but when pushing starter button, nothing happens. Can jump around solenoid and it will turn over. Checked continuity between starter button and solenoid and is okay. Checked wire between starter and starter button and it is okay. We have tried jump starting, pulling. Could there be a wiring problem? We have gone over schematics and seem to be connected correctly. We would sure like some advice.
- Re: Rebuilt 8N will not start Jim Schofield Tuesday, August 25, 2009
(0)
- Re: Rebuilt 8N will not start Bob G Monday, August 24, 2009
(0)
- Re: Rebuilt 8N will not start Larry Monday, August 24, 2009
(0)
- Re: Rebuilt 8N will not start Don Sunday, August 23, 2009
(3)
- Re: Rebuilt 8N will not start Don Sunday, August 23, 2009
(0)
- Re: Rebuilt 8N will not start Roger Sunday, August 23, 2009
(1)
- Re: Rebuilt 8N will not start Roger Sunday, August 23, 2009
(0)
- Re: Rebuilt 8N will not start Don Sunday, August 23, 2009
(0)
Post a Followup
