Re: no spark,won't start

[ Follow Ups ] [ Post Followup ] [ Ford 9N, 2N, 8N, NAA Tractor Discussion Forum ] [ FAQ ]

Hop To Another Discussion Forum:
SSB Tractor (ssbtractor.com)Your Farm Tractor Supply Headquarters
Allis ChalmersAveryBobcatCase / David BrownCaterpillarCockshuttDeutzEuclid FordInternational Farmall
John DeereKubotaMassey FergusonMinneapolis MolineMitsubishi / SatohNew Holland OliverWhiteZetorMiscellaneous
HomePartsManualsProductsFeaturesContact Us
Antique Tractors ClassifiedsTractors ForumTractor BooksFarm Tractors Photo Classifieds
| SSB Tractor Home | Tractor Parts | Tractor Manuals | Tractor Seats | Tractor Implements | Rear View Backup Cameras |
| Pedal Toy Tractors | Backhoe Loaders | Front End Loaders | PTO Generators | Antique Tractors History | Related Links |

Search for:   Model (Ex. 8N, 9N, 600, 800):  
Search for Tractor Parts:Tractor Part (Use singular keywords... for example, "radiator" as opposed to "radiators"):

Search This Message Board:
Posted by kenindiana on Thursday, September 06, 2007:

In Reply to: no spark,won't start posted by Louis Loges on Saturday, July 14, 2007:

Louie, i would replace the condensor , if you have voltage in and out of the coil then it is good. Make sure you haave voltage to the distribitor, check it at the lug on the side of the dist. also make sure the plugs are dry, with gas coming out of the bottom of the dist. they could be wet and fouled out so they will not fire. if you bhave voltafge at the lug replace the condensor. with the cap off the dist. have some one turn the engine over and see if you have spark at the points. if not replaces the condensor .if so check the rotor and make sure it is clean at both the top and the side. I have seen them have a small burned hole in the top and will not let the spark go where it needs to go. GOOD LUCK KEN.

Follow Ups:


Post a Followup

Name:
E-Mail:

Subject:

Comments:

[ Follow Ups ] [ Post Followup ] [ Ford 9N, 2N, 8N, NAA Tractor Discussion Forum ] [ FAQ ]