Save This Page ] [ Follow Ups ] [ Post Followup ] [ Oliver Tractor & White Tractor Discussion Forum ] [ FAQ ] Save This Page ] [ Follow Ups ] [ Post Followup ] [ Oliver Tractor & White Tractor Discussion Forum ] [ FAQ ]
| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Tractor Parts | | Tractor Manuals | | Tractor Implements | | Tractor Seats | |
| | Rear View Backup Camera | | Pedal Toy Tractors | | Tractor Loaders | | PTO Generators | | Fuel Saver Efficiency Additive | |
| | Rustic Home Decorating & Decor | | Tractor Books | | Trailer Parts | | Antique Farm Tractors Blog | | Antique Tractors History | |
In Reply to: Gear selections on Oliver 77 RC posted by Rick Graham on Thursday, January 18, 2007:
Rick, if the shifter has "jumped" out of the correct notch in the top of the transmission, you may not get the higher gears. If this is what is wrong, it's a simple fix.
Take out the 2 bolts that hold the shifter into the top of the tranny. Pull up on the shifter to remove it, BUT BE CAREFULL THAT YOU DONT DROP THE 2 SMALL SPRINGS UNDER THE SHIFTER BASE INTO THE TRANNY! Once the shifter is out, look into the top of the tranny at the 2 rails that have a notch in them. Using a large screwdriver, align the notches next to each other, replace the shifter and you are done.
This is a job that can be completed in about 20 minutes, no biggie!
Good luck.
Jim Thurnau