Save This Page ] [ Follow Ups ] [ Post Followup ] [ Oliver Tractor & White Tractor Discussion Forum ] [ FAQ ] Save This Page ] [ Follow Ups ] [ Post Followup ] [ Oliver Tractor & White Tractor Discussion Forum ] [ FAQ ]
| | SSB Farm Tractor Parts, Manuals & Antique Tractors | | Tractor Parts | | Tractor Manuals | | Tractor Implements | | Tractor Seats | |
| | Rear View Backup Camera | | Pedal Toy Tractors | | Tractor Loaders | | PTO Generators | | Fuel Saver Efficiency Additive | |
| | Rustic Home Decorating & Decor | | Tractor Books | | Trailer Parts | | Antique Farm Tractors Blog | | Antique Tractors History | |
In Reply to: Re: 1750 Hydraulic Problem posted by KenDeno on Sunday, August 13, 2006:
on the left top of the small housing there is a plug that points straight to the front of the tractor,it should be a half inch pipe thread size,take this plug out and reach inside that hole with a three eighth inch pipe plug tighten this plug.then on the left side of the small housing toward the rear, is another half inch plug this should be removed,then install a hose in that hole for a return line from the external valve. the first plug i told you to take out is for a pressure line to the valve.do not start tractor until you have your valve hooked up like this,or you connect the pressure and return line together. if you start it without the valve hooked or the two lines connected it will blow the pump.