Lifetime Tooth Bar
Custom built for buckets up to 82" in width, T-1 industrial grade
steel tooth / shank welded to cutting edge with slotted end tabs. Bar
may be ordered for any bucket with a 3/8" to 3/4" tick cutting edge.
 |
| Model |
Number of Teeth |
Fits Buckets |
Cutting Edge |
Price |
| TB-5 |
5 Teeth |
36" - 40" I.D. |
1/2 x 3" |
$344.00 |
| TB-6 |
6 Teeth |
40" - 50" I.D. |
1/2 x 3" |
$430.00 |
| TB-7 |
7 Teeth |
50" - 62" I.D. |
1/2 x 3" |
$450.00 |
| TB-8 |
8 Teeth |
62" - 72" I.D. |
1/2 x 4" |
$510.00 |
| TB-9 |
9 Teeth |
72" - 82" I.D. |
1/2 x 4" |
$560.00 |
|
Replaceable Tooth Bar
T-1 industrial grade steel shank with 2A-Style tooth points pined
onto shanks, shanks are welded to cutting edge with slotted end tabs,
custom-built for buckets up to 82" in width. Bar may be ordered for any
bucket with 3/8" to 3/4" thick cutting edge.
 |
| Model |
Number of Teeth |
Fits Buckets |
Cutting Edge |
Price |
| TB-5R |
5 Teeth |
36" - 40" I.D. |
1/2 x 3" |
$368.00 |
| TB-6R |
6 Teeth |
40" - 50" I.D. |
1/2 x 3" |
$450.00 |
| TB-7R |
7 Teeth |
50" - 62" I.D. |
1/2 x 3" |
$486.00 |
| TB-8R |
8 Teeth |
62" - 72" I.D. |
1/2 x 4" |
$510.00 |
| TB-9R |
9 Teeth |
72" - 82" I.D. |
1/2 x 4" |
$540.00 |
| RT-2A |
2 A-Style replacement tooth |
|
|
$6.50 |
| RT-P |
5/16" x 1 1/2" roll pin |
|
|
$.90 |
| RS-5R |
Weld-on replacement shank |
|
|
$40.00 |
|
Replacement Cutting Edges and End Pieces
Weld-On Cutting Edges
High carbon, single bevel steel cutting edge. Cut to the exact
lengths are available. Full bar lengths are available.
 |
| Size |
Weight/Inch |
Total Bar Length |
Price |
| 3/8 x 3" |
.28 lbs. |
19'1" |
$.80 |
| 1/2 x 3" |
.37 lbs. |
20'2" |
$.90 |
| 1/2 x 4" |
.50 lbs. |
20'6" |
$1.10 |
| 1/2 x 6" |
.80 lbs. |
38'2" |
$1.80 |
| 3/4 x 4" |
.71 lbs. |
31'0" |
$1.80 |
| 3/4" x 6" |
1.14 lbs. |
39'8" |
$2.50 |
|
Weld-On End Pieces
|
End pieces are cut in profile of the base for a neat fit. Weld-on
end pieces are better than single, formed pieces for several reasons:
- Strength: heating and bending the ends weakens the edge at the
most critical point - the corners. Welding the end pieces creates a
strong, straight corner.
- Precise fit: you control the spacing of the end pieces to ensure
a proper fit.
- Easy installation: you control the spacing of the end pieces in
the corners. This saves time over trying to make a large bucket fit
a small edge or by filling gaps with weld.
- Cost: end pieces take less time to manufacture, which saves you
money.
|
| Size |
Price |
| 3/8 x 3" |
$20.00 |
| 1/2 x 3" |
$16.00 |
| 1/2 x 4" |
$18.00 |
| 1/2 x 6" |
$23.00 |
| 3/4 x 4" |
$23.00 |
| 3/4 x 6" |
$32.00 |
|
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
