Backhoe Loader

      Below are listed our line of backhoe loaders. These kits allow you to add a backhoe to almost any make or model of tractor that you have. If you are interested in any of the models that we offer below, we invite you to contact us for information about the setup needed for your particular machine.

SSB Tractor (ssbtractor.com)

Your Farm Tractor Supply Headquarters

Allis Chalmers	Avery	Bobcat	Case / David Brown	Caterpillar	Cockshutt	Deutz	Euclid	Ford	International Farmall
John Deere	Kubota	Massey Ferguson	Minneapolis Moline	Mitsubishi / Satoh	New Holland	Oliver	White	Zetor	Miscellaneous

Search for Tractor Parts:	Tractor Part (Use singular keywords... for example, "radiator" as opposed to "radiators"):
All Tractor Parts Allis Chalmers Tractor Parts Case / International Harvester Tractor Parts Caterpillar Tractor Parts David Brown Tractor Parts Deutz Tractor Parts Ford Tractor Parts John Deere Tractor Parts Kubota Tractor Parts Massey Ferguson Tractor Parts Oliver, White, Long, Hesston/Fiat Tractor Parts Zetor Tractor Parts

---

Ordering Information

Model 4076 Backhoe Loader

Specifications

Maximum Digging Depth	6' 6"
Digging Depth with 2' Flat Bottom	6' 0"
Reach from Swing Pivot	9' 0"
Transport Height	5' 3"
Bucket Clearance or Loading Height	5' 0"
Bucket Curl	165 degrees
Swing Arc	140 degrees
Stabilizer Spread Folded Down in Operating Position	7' 0"
Stabilizer Spread Folded Up in Transport Position	5' 8"
Hydraulic System is a four lever six-spool control valve with main circuit relief set at 2000 PSI. System requires a minimum of 3.5 GPM and a maximum of 4.5 GPM of hydraulic fluid for best operation.
Boom Lifting Power (boom straight out dipper stick at 90 degrees down)	640 lbs.
Boom Lifting Power (boom and dipper stick straight out)	375 lbs.
Bucket Power (fully curled at cutting edge)	1870 lbs.
Crowd Power at end of cutting edge	1728 lbs.
Bucket Pryout Power (partially curled)	4076 lbs.
Rigid mounted for maximum digging power. Category I three-point hitch mount and selected quick detach frame kits for lawn and garden tractors.
Hydraulic Cylinders and Rods are chrome plated.
Rubber Swing Shock Absorbers.
All pins are locked in place.
Safety Transport Lock.
Replaceable, Steel wear bushings at all major pivot points
Specifications may vary with tractor model and are based on boom pivot 11" above ground level.

Model 4076 Category I backhoe loader, painted all black with standard steel pads	$5621.40
Backhoe Locking Bar Mount Kit (attaches and locks backhoe to tractor's lower hitch arms	$100.00

Model 6970 Backhoe Loader

Specifications

Maximum Digging Depth	8' 0"
Digging Depth with 2' Flat Bottom	7' 6"
Reach from Swing Pivot	10' 11"
Transport Height	7' 10"
Bucket Clearance or Loading Height	6' 6"
Bucket Curl	165 degrees
Swing Arc	180 degrees
Stabilizer Spread Folded Down in Operating Position	7' 0"
Stabilizer Spread Folded Up in Transport Position	5' 8"
Hydraulic System is a four lever six-spool control valve with main circuit relief set at 2000 PSI. System requires a minimum of 4.5 GPM and a maximum of 6.0 GPM of hydraulic fluid for best operation.
Boom Lifting Power (boom straight out dipper stick at 90 degrees down)	760 lbs.
Boom Lifting Power (boom and dipper stick straight out)	455 lbs.
Bucket Power (fully curled at cutting edge)	3200 lbs.
Crowd Power at end of cutting edge	1692 lbs.
Bucket Pryout Power (partially curled)	6970 lbs.
Rigid mounted for maximum digging power. Category I three-point hitch mount and selected quick detach frame kits for lawn and garden tractors.
Hydraulic Cylinders and Rods are chrome plated.
Rubber Swing Shock Absorbers.
All pins are locked in place.
Safety Transport Lock.
Replaceable, Steel wear bushings at all major pivot points
Specifications may vary with tractor model and are based on boom pivot 11" above ground level.

Model 6970 for Category I backhoe loader, painted all black with standard steel pads	$6923.10
Rubber Street Pad Kit bolts on to standard steel pads	$324.00
Backhoe Locking Bar Mount Kit (attaches and locks backhoe to tractor's lower hitch arms	$112.00

Model 9000 Backhoe Loader

Specifications

Maximum Digging Depth	9' 0"
Digging Depth with 2' Flat Bottom	8' 6"
Reach from Swing Pivot	11' 2"
Transport Height	7' 8"
Bucket Clearance or Loading Height	7' 6"
Bucket Curl	180 degrees
Swing Arc	180 degrees
Stabilizer Spread Folded Down in Operating Position	9' 4"
Stabilizer Spread Folded Up in Transport Position	5' 10"
Hydraulic System is a four lever six-spool control valve with main circuit relief set at 2000 PSI. System requires a minimum of 6.0 GPM and a maximum of 8.0 GPM of hydraulic fluid for best operation.
Boom Lifting Power Less Bucket (boom straight out dipper stick at 90 degrees down)	733 lbs.
Boom Lifting Power (boom and dipper stick extended)	582 lbs.
Bucket Power (fully curled at cutting edge)	3591 lbs.
Crowd Power at end of dipper stick	2510 lbs.
Crowd Power at end of bucket teeth	1223 lbs.
Bucket Pryout Power (partially curled)	6725 lbs.
Rigid mounted for maximum digging power. Category I or II three-point hitch mount.
Patented Hydraulic Swing cushion protection prevents "shock load" at end of swing travel.
All pins are locked in place and pivot points are zerked for grease lubrication.
Safety Transport Boom Lock.
Replaceable wear bushings at all major pivot points for a 5.7 sq. in. of bearing surface at every major pivot point.
Hydraulic pressure gauge and adjustable hinged seat are standard equipment.
Specifications may vary with tractor model and are based on boom pivot 11" above ground level.

Model 9000 backhoe painted all black with standard steel pads	$7980.46
Rubber Street Pad Kit bolts on to standard steel pads	$281.00
Backhoe Locking Bar Mount Kit (attaches and locks backhoe to tractor's lower hitch arms	$128.00